Aux Switch For Pigtronix Infinity Looper / Echolution - Two Click-Less Buttons Guitar Aux Switch

Add REVERSE/NORMAL or UNDO/REDO to your Pigtronix Infinity Looper or Echolution. Same functions as the Pigtronix E2R and SPL-R Aux switches, just a lot smaller to save space on your board. 

3.64 X 1.52 X 1.06 (Inch)
93 X 39 X 27 (mm)

For the Infinity Looper: 

Switch 1 will give you the capability to UNDO/REDO your recorded Loop
Switch 2 will allow you to REVERSE/NORMAL. 

For The Echolution:
If you hold down the TAP switch while powering up, you can use the Jump and Freeze function when the Echolution is engaged and when not engaged, you'll be able to scroll through the first four presets of the current bank.

So how do I OVERDUB?
Once you have started the base layer recording, simply press Switch 1 to close your initial loop and go straight into playback with overdub active. Press the appropriate Loop footswitch on the Pigtronix Looper (as you normally would), to close the overdub when desired and begin regular playback. 

* You'll need a TRS Cable, if you bundle it with our American Loopers TRS cable, you'll get free shipping on the cable, so you don't have to pay shipping twice